![]() The web-interface only use unicast though, so it will work with a "normal" connection. Provide a centralized access point and easy management of your entire remote desktop infrastructure with NoMachine Cloud Server. You will need to log in to your router and forward the correct ports to your media server. Port forwarding involves changing some settings in your router. You can store all your media files in one place on the media server and can access them remotely or locally using a computer or smartphone. I doubt that UPnP/DLNA would work over VPN without a very custom setup, since it relies on multicast which isn't usually handled by a VPN tunnel. If you want to allow remote access to your media server you can set up a port forward which will direct the correct traffic to your media server. The web-interface could also be accessed using VPN. This isn't exactly practical, but it would be possible. Please any suggestion is it possible to do so remote-access. All that’s left to do now is to install Twingate on your device (we support Windows, Mac, Linux and have apps for iOS and Android) and access your Plex Media Server. and you would get all kind of warnings in the other end about the certificate unless you actually went online and bought a valid certificate from one of the providers - which I assume is way beyond the scope of this. Remote end gadget should use only speaker and screen and not processing power of their own. Congrats Your Plex Media Server is now enabled for secure remote access. If you are using a mobile device you will then. To protect against this, you would have to run UMS with HTTPS, but then you'd need to get a certificate working. In order to access your PLEX server remotely you will need either laptop, iPhone, Android phone, or tablet. But, this old form of authentication isn't exactly safe, and sends the credentials unencrypted so anyone listening on the line could pick them up. You would then have to create users and put them in UMS.cred (AFAICR), and only those would be able to log in per se. UMS has the ability to enable "basic HTTP authentication" which is a mechanism rarely used these days, but that are built in to all browsers. If you only opened it for a limited time, chances are probably slim that somebody would discover and do this in time though, but nothing would prevent it. This means that anybody on the internet that knew your IP and port and had a web-browser would be able to play the media your shared with UMS. The intended use case is on the local network, where this isn't relevant. While it should work, there is very limited possibilities to control access to UMS. I wouldn't exactly recommended it though. All you would have to do is to do a "port forward" of port 9001 to the computer running UMS in your router. ![]() If you really wanted to, you could configure your router to allow access from the Internet to UMS' web interface, and your daughter could connect to your (public) IP address at that port in her browser (9001 by default AFAICR).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |